STRUCTURAL DESIGN PRINCIPLES Single channel

Chair (Coordinator) and Rapporteur: LIVIO PEDONE

Lecturers

Objectives

The course gives the students the knowledge needed to perform the design of
structural elements subjected to almost static load.

Learning outcomes

The course aims to provide students with the fundamentals for the design and verification of structural elements subjected to static or quasi-static actions. Students will acquire the theoretical foundations and practical skills necessary for the design of steel and reinforced concrete structures through a conscious application of the current Technical Standards for Construction.

At the end of the course, the student will be able to:

1. Knowledge and understanding
Understand the fundamental theoretical and methodological principles for the design of structural elements in steel and reinforced concrete.

2. Applying knowledge and understanding
Apply the acquired knowledge to analyse, design, and verify ordinary structures using current technical standards.

3. Making judgements
Critically evaluate design choices and interpret the results of structural verifications.

4. Communication skills
Clearly and effectively present and discuss analysis and design procedures using appropriate technical language.

5. Learning skills
Independently deepen more advanced topics in structural engineering.

Prerequisites

Required prior knowledge:

‑ Geometrical properties of surfaces: area, first moments of area, moment of inertia;

‑ Basic knowledge of Structural Mechanics: stress, strain, stress-strain relationship; elastic modulus; Poisson's ratio; principal stresses and principal directions; the De Saint Venant problem; the Jourawsky theory; beam theory;

‑ Solution of isostatic and hyperstatic systems; bending moment M and shear V diagrams for common isostatic and hyperstatic systems.

Programme

Part I: Principles of Structural Analysis for Design
‑ Definition of construction and structure. Identification of the structural system, including constraints, loads, and their paths within the structure;
‑ Nominal life, service classes, and reference period; design criteria and fundamental structural requirements: strength, stiffness, ductility, stability, robustness, durability, resilience;
‑ Qualitative aspects of beam theory; the de Saint Venant's problem; Bernoulli-Navier regions (B-Regions) and diffusive regions (D-Regions);
‑ Structural reliability, definition of capacity and demand, performance-based design, semi-probabilistic approach, limit states, safety factors;
‑ Ideal structural systems and common structural typologies: inextensible axial elements, beam elements rigid in bending, shear-type frames, fixed and movable node frames, multi-story frame structures, bracing elements, shear walls, foundation elements. Qualitative analysis of elastic deformation of frame structures;
‑ Actions on structures, load combinations.

Part II: Steel Structures
‑ Mechanical properties of steel material, experimental tests, stress-strain relationship;
‑ Structural morphology of steel buildings: floors, beams, columns, bracings, connections;
‑ Tensile and compressive loads; instability phenomena; Euler's critical load; role of imperfections;
‑ Design and verification of steel structural elements;
‑ Bolted and welded joints.

Part III: Reinforced Concrete (RC) Structures
‑ Mechanical properties of the material, technology, experimental tests, stress-strain relationship. Bi-axial stress. Longitudinal and transverse reinforcement. Confined Concrete. Bonding forces.
‑ Structural morphology of reinforced concrete buildings: floors, beams, columns, walls, foundations;
‑ Design and verification of structural elements. Failure modes. Axial load-moment interaction domain. Shear capacity of reinforced concrete components; Ritter-Morsch truss model.
‑ Translation of the bending moment diagram; construction details; structural drawings.

Part IV: Exercise Activities (scheduled with Parts I, II, III)
‑ Definition of the structural systems;
‑ Load combinations;
‑ Buckling;
‑ Design and verification of steel structural components;
‑ Design and verification of bolted connections
‑ Design and verification of RC structural components;
‑ Final exam simulations

Books

(Part I and II) F. Bontempi, S. Arangio, L. Sgambi (2008). Tecnica delle Costruzioni, Basi della progettazione. Elementi intelaiati in acciaio, Carocci Editore.
(Part I and III) E. Cosenza, G. Manfredi, M. Pecce. (2019). Strutture in cemento armato. Basi della progettazione, 3° ed., HOEPLI.
(needed for exercises) B. Furiozzi, C. Messina, L. Paolini. Prontuario per il calcolo di elementi strutturali.

Bibliography

E. F. Radogna. Tecnica delle costruzioni, Vol. 1 & Vol. 2.
R. Calzona, C. Cestelli Guidi (1992). Il Calcolo del Cemento Armato, con i metodi delle tensioni ammissibili e degli stati limite, HOEPLI.
R. Park, T. Paulay (1974). Reinforced Concrete Structures, John Wiley & Sons. (in inglese)
S. Pampanin (2014). Vol. 1: Design and Behaviour of Reinforced Concrete Structural Members. (in inglese)

Lessons mode

The course will be delivered in ITALIAN, in person at the Rieti venue, Palazzo Aluffi, via Cintia 106, 02100, Rieti (RI).
The course will include lectures, exercises, seminars, and exam simulations.
The lectures will contribute to the student's knowledge acquisition process regarding the design and verification of structural elements subject to static actions. Moreover, exercise and exam simulation activities will provide students with the ability for correct application of the acquired knowledge.

Frequency

Attendance is not mandatory. However, attending the course in person is EXPECTED and STRONGLY RECOMMENDED.

Exam mode

The exam is aimed at verifying the achievement of the expected learning outcomes.

Written exam
The written exam consists of a design exercise involving simple steel and reinforced concrete structures.
The test is aimed at assessing:
• the ability to apply the acquired theoretical knowledge;
• the ability to correctly set up and carry out structural verifications;
• the correctness and completeness of the calculation procedures.
Score: 0–30.

Oral exam
Students who obtain at least 18/30 in the written exam are admitted to the oral exam.
The oral exam consists of:
• questions on the topics covered during the course;
• discussion of the written exam;
• possible additional exercise.

The oral exam is aimed at assessing:
• the level of understanding of theoretical aspects;
• the ability to formulate and justify design choices independently;
• the ability to critically analyse and interpret the results of structural verifications;
• technical communication skills.

Final assessment
The final grade is expressed on a 30-point scale and takes into account both the written and the oral exam, with particular emphasis on the oral exam, which is considered essential to assess the student’s actual understanding of the subject and their ability to justify design choices.
The evaluation considers:
• the correctness, completeness, and rigor of the written exam;
• the theoretical understanding of the topics;
• the ability to apply knowledge to solve design problems;
• the ability to justify and critically discuss design choices;
• clarity of presentation and appropriate use of technical language.

To pass the exam, a minimum grade of 18/30 is required.
A good performance in the written exam alone is not sufficient: the student must also demonstrate, during the oral exam, an adequate level of understanding and critical reasoning.
Higher grades are awarded to students who demonstrate full mastery of the topics, the ability to apply knowledge independently and critically, and a clear and rigorous presentation.

Example exam questions

Example of Written Test exercises :
‑ Evaluate the Euler's critical load of a steel column;
‑ Solve a simple isostatic system and design a steel component;
‑ Design a reinforced concrete structural component subject to bending moment / axial load and bending moment; draw reinforcement and construction details.

Example of Oral Discussion questions:
‑ Definition of the structural systems;
‑ Buckling;
‑ Design and verification of steel structural components;
‑ Design and verification of bolted connections
‑ Design and verification of RC structural components;

Arguments

  • Part I: 1.1 Structural design: introduction and motivations
    1.2; Structural safety and reliability
    1.3; Beam theories and ideal behavioral models
    • Books: 1) F. Bontempi, S. Arangio, L. Sgambi (2008). Tecnica delle Costruzioni, Basi della progettazione. Elementi intelaiati in acciaio, Carocci Editore. 2)E. Cosenza, G. Manfredi, M. Pecce. (2019). Strutture in cemento armato. Basi della progettazione, 3° ed., HOEPLI.

  • Part II: 2.1 Steel structures; 2.2 Design and verification of steel structural elements; 2.3 Construction details and structural connections
    • Books: F. Bontempi, S. Arangio, L. Sgambi (2008). Tecnica delle Costruzioni, Basi della progettazione. Elementi intelaiati in acciaio, Carocci Editore.

  • Part III: 3.1 Reinforced concrete (RC) structures; 3.2 Design and verification of RC structural elements; 3.3 Construction details
    • Books: E. Cosenza, G. Manfredi, M. Pecce. (2019). Strutture in cemento armato. Basi della progettazione, 3° ed., HOEPLI.

  • Excecises (scheduled with Parts I, II, III)
    • Books: B. Furiozzi, C. Messina, L. Paolini. Prontuario per il calcolo di elementi strutturali.

Sustainability goals

  • Goal3
  • Goal9
  • Goal11
  • Academic year2026/2027
  • Degree program to which the course belongsTechnological and Digital Innovation Engineering applied to the Built Environment (Campus Rieti)
  • Lesson code10603005
  • Year and semester3rd year - 1st semester
  • Activity typeAttività formative caratterizzanti
  • Academic areaIngegneria della sicurezza e protezione delle costruzioni edili
  • SSDICAR/09
  • Mandatory presenceNo
  • Languageita
  • CFU6 CFU
  • Total duration60 hours
  • Hours distribution60 classroom hours